Details:
We're trying to clear our shop so we're selling some of our pre-built copters. This one is an octocopter, with APM, 915MHz XBee telemetry radio set, camera gimbal..., two back up motor/prop sets, several extra arm tubes, comes with 8 Nano-tech 3S batteries, most of them used, the pair on the copter just got 1 quick flight, and one is new still in the box. Frame is made from Rusty's parts from the now defunct aglhobbies website.
This Octocopter was only flown a couple of times, no accidents or crashes. It probably has less than 20 minutes of flight time. Motors are all 750Kv and props are 14" APC slowflyer. It's a little over propped, but flies fairly efficiently with this setup as long as you don't put a heavy camera on it. A GoPro works best. ESC's are SimonK 30A 4S. I've done a few short flights with 4S on this configuration and it works well too, hovering at about 1/3 throttle with a GoPro. It's also got a D4R-II receiver installed for use with a FrSky Taranis radio, or DJT/XJT module. I recommend using 3S or 4S batteries with around 10000mAH total capacity. I did my initial tests with 2x6000 3S for 3S 12000mAH total.
The motor mounts have EAR dampers to absorb motor/prop vibraration, providing very smooth frame for flight controller and camera mounting.
https://www.youtube.com/watch?v=op1ExasFkI8
https://www.youtube.com/watch?v=iVEAGClw3sM
Local pickup only, we can bring it to a nearby park to do a test flight with you if desired.
It only needs a radio transmitter to fly. If you buy a Taranis from us, we will give some discount on it!