Loading... Please wait...

Our Newsletter


FrSky SMART PORT to UART (RS-232) and AD Converter/Adapter (type B)

  • Image 1
  • Image 2
  • Image 3
RRP:
$18.49
Your Price:
$16.99 (You save $1.50)
Brand:
Condition:
New
Weight:
0.13 LBS
Availability:
Y
Shipping:
Calculated at checkout
Quantity:


Product Description

This is an adapter/converter that supports two modes of operation:

1) Analog Signal input via the Smart Port, allowing the FBVS VOLTAGE sensor or other analog sensor (0-3.3V range) to connect with an X8R or other Smart Port receiver.

2) RS-232 Serial Data-Transmission is also supported through the Smart Port, allowing data passing for the technical DIY enthusiast.  In order to enable Data-Transmission, two devices [the Host (type A) and Remote (Type B)] are required to be used as a pair and set in the same configuration.  This mode could be used to connect a computer at the R/C transmitter to a device on the R/C craft over the wireless RS-232 link.  Note that the actual link capacity is recommended at 30 bytes/sec (with error correction), or up to 60 bytes/sec in high capacity mode (no error correction). 

It is possible to activate and use both modes at the same time.

The type A HOST (see this for more detail: https://www.helibatics.com/frsky-smart-port-to-uart-rs-232-and-ad-converter-adapter-type-aconnect with module, and type B is REMOTE connect with Receiver.

 

Specification:

Model: SP2UART

Size: 44mmX15mmX7mm

Operational Voltage: DC 4 - 10V

Current Draw: 20mA@5V

Weight: 3g

Operating Temperature Range: -40℃~85℃

Baud rate is 300bps by default and can be reconfigured up to 9600bps max.





Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Add to Wish List

Click the button below to add the FrSky SMART PORT to UART (RS-232) and AD Converter/Adapter (type B) to your wish list.

You Recently Viewed...