Loading... Please wait...

Our Newsletter


CLEARANCE - HobbyKing F-10A 10AMP 10A SimonK Brushless ESC w/ 1A 5V UBEC for quadcopter APM2

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
RRP:
$15.99
Your Price:
$10.99 (You save $5.00)
Weight:
0.10 LBS
Availability:
Y
Shipping:
Calculated at checkout
Quantity:


Product Description

You are looking at a NEW HobbyKing F-10A 10Amp Brushless ESC with the NEWEST SimonK multicopter firmware flashed and tested!! (version BS V2014-06-18)

This is THE BEST 10A ESC for multirotor! Read on to understand why:

With the included SimonK firmware (bs.hex), these ESC's are perfect for any multicopter device requiring up to 600Hz response, such as a tricopter, quadcopter, hexacopter, or octocopter. These work great with DIYDrones APM2.X series UAV controllers, DJI, PixHawk and many others.

This hardware, with the SimonK firmware, gives you the perfect solution for multirotor use:

Highest accuracy with Crystal Oscillator (Temperature won't affect the PWM operating range like other cheap ESC's).
No low voltage cutoff, because any cutoff in a multirotor = crash.
No over temp cutoff, because any cutoff in a multirotor = crash.
Super high refresh rate, no buffering of the input signal, resulting in up to 600Hz response rate.
16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal).
Super simple, foolproof operation! Nothing to program other than the throttle range.
You can easily upgrade the SimonK firmware yourself using the Hobbyking Turnigy USB Linker
Don't buy a 10A multirotor ESC that doesn't meet all these criteria! There are a lot of low quality 10A ESC out there!


ESC Specs:

Max cont. current: 10A
Peak current: 12A
Voltage: 2-3S lipo, 5-8 NiCD/NiMH
BEC: 5V/1A
Size: 26x5x18mm
Weight: ~8g


NOTE 1 (SimonK): Before you buy these, you should make yourself familiar with the somewhat experimental nature of the SimonK firmware. This software pushes the motor response to the limit, so there may be motor and prop combinations that won't work. Due to the lack of overcurrent/overheat/low voltage sensing (needed for multirotors), it's easier to destroy the ESC and possibly the motor too. I'm can't tell you what will or won't work, other than the motors I sell that I've personally used, so please consult the main SimonK threads on various forums for more info. Neither I, nor SimonK will be responsible for any damage that may occur, so know and accept the risks before using these. That said, I've personally had fantastic results with this firmware and wouldn't use anything else! SimonK firmware is the firmware of choice for hobbyists as well as professional multi-rotor pilots.


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Add to Wish List

Click the button below to add the CLEARANCE - HobbyKing F-10A 10AMP 10A SimonK Brushless ESC w/ 1A 5V UBEC for quadcopter APM2 to your wish list.

You Recently Viewed...